- Contact Person : Ms. Wang Lei
- Company Name : Xinxiang Tianfeng Machinery Manufacture Co., Ltd.
- Tel : 86-371-63866036
- Fax : 86-371-63866036
- Address : Henan,Xinxiang,Tianfon Industry Part, 17# Torill, New 1 Street Development Area, Xinxiang City, Henan Province,china
- Country/Region : China
- Zip : 450000
The roll forming machine used for restraining dust
1 The production line process flow
Uncoiling—guiding device---lubricating system----roll forming---punching----cutting --–product
2 MACHINE COMPONENTS:
(1) Uncoiler 1 set(5 tons)
(2) Feeding device 1 set
(3) Lubricating system 1 set
(4) Roll-Forming M/C 1 set
(5) Punching&cutting Device 1 set
(6) Hydraulic system 1 set
(7) PLC Control System 1 set
(8) Product Rack (un-powered) 1 set (two parts, total length is 6m)
3 TECHNICAL SPECIFICATION
(1) Unpowered Un-coiler:
Used to support and open the coil, single-head structure.
Un-powered structure.
Inner diameter of coil: φ508mm
Outer diameter of coil: φ1200mm
The coil width: 580 mm
Capacity weight: ≤5T
(2) Feeding device
It can be adjusted centering longitude, and adjusted by handwheel set on one side.
The adjusting method is to change the distance and relative location between guiding rollers by waving handwheel. Which can promise the entering sheet location precise.
(3) Lubricating sytem
It adopts aluminum frame structure, and can adjust the oil volume.
To lubricate the sheet when punch and cut, which can reduce the friction and prolong the lifetime of punch die and cutting dies.
(4) Roll forming machine
Structure 1:
Raft structure, motor drives, chains transmit.
The roller adopts combination structure, and its art adopts Germany COPRA professional software, and has FEA analysis, which can promise the roller precise.
Roll forming step: about 17 steps
Roller material: Cr12, quenching HRC58-62, with hard chrome on the surface, with high wearing resistance.
Voltage: 380V/50HZ, 3 phase.
Line speed: about 15m/min
Structure 2:
Welded structure. motor drives, chains transmit.
The roller adopts combination structure, and its art adopts Germany COPRA professional software, and has FEA analysis, which can promise the roller precise.
Roll forming step: about 17 steps
Roller material: Cr12, quenching HRC58-62, with hard chrome on the surface, with high wearing resistance.
Voltage: 380V/50HZ, 3 phase.
Line speed: about 10m/min
The roll forming machine used for restraining dust
